When you are learning to drive in Oxley, you need to be careful about braking because if you hit them too hard while driving fast; your car might roll over causing an accident. Similarly, correct timing is required to pull the brakes so that you can stop your vehicle in the desired location.
All of these are included in the driving lessons in Oxley that are provided by renowned schools. And now we will take a look at how you can pull the brakes with precision while on the road.
1) Determine Where You Want To Stop
You will need to determine the area where you wish to make your car stop. Otherwise, smooth braking might not be possible. So, look for roadside signs, signals, and markings, along with the cars that are in front and on the back. Analyse how the other drivers are driving and the pace at which they are manoeuvring their cars. Then, when you find it safe, push the brakes by applying the right amount of force to stop the car smoothly.
2) Applying the Right Force on the Brake Pedals
To stop the car smoothly you will need to use the right amount of force. This requires a bit of practice at first but as time flies by you will get a hold of it and can eventually stop your vehicle without the sudden jolt.
For a smooth stop, first, determine the location where you want to stop and then start to decrease the speed of your vehicle from the calculated distance and when the speed starts to decrease, gradually start to apply pressure on the brake pedal until the car comes to a halt.
3) ‘On-Time’ Braking
We have mentioned this earlier already. ‘On-time’ braking refers to stopping the vehicle at once without the sudden forward thrust. To do this, the instructor from your affordable driving school near Oxley will first mark the destinations where you should stop your car in the driving sessions. And when you have mastered smooth braking a bit, they will suddenly tell you to stop when you are driving and at that time you will need to stop the car there on the point by applying the correct pressure on the pedals without avoiding the forward thrust.
4) Avoiding the Forward Thrust while Braking
This is quite common when you are a learner. In manual cars, you will need to push the clutch and the brake pedal at once to stop the car smoothly. But if you push the brake pedal without pushing the clutch, the car will stop with the forward jolt and the engine will turn off. Not only is this damaging to the car but it can cause accidents too. So, when pressing the brake pedal you will always need to be careful as a beginner.
To conclude, these are a few car-braking lessons that you will receive from your instructors while in your driving sessions and you should always follow these to stop your car smoothly and safely on the road.
Learn To Drive Safely. Contact Us to Learn From the Experts Today
Start-Smart Driving School is a renowned driving school in Oxley providing driving lessons through the most experienced instructors. So, if you want to learn to drive safely from the experts, call us to book your session now.